In this video, I’ll show you how to perform a channel scan, also known as channel programming. Note that your TV must be connected to a cable or antenna source through the coax port. If you use a cable box, you do not need to perform this procedure. In addition, your particular TV might have a different procedure. If these instructions don’t work for your TV, check your user’s guide. If your TV’s menu looks like this one, follow this procedure. Repeatedly press the INPUT button on your remote until ANT/CABLE is selected. Press the SETUP button on the remote located near the bottom. Use the arrow buttons on the remote to select INSTALLATION and press the OK button. Select Channel Tuning and press the OK button. Select ANT/CABLE In and press the OK button. Select either Antenna or Cable depending on your setup and press the OK button. Select Auto Tuning and press the OK button. Press the OK button again to start the scan. Progress will be displayed on your TV. Once the scan is complete, the TV will display the lowest scanned and identified channel. You should now know how to perform a channel scan on your Toshiba Cloud TV. For more information, visit support.toshiba.com.