In this video, I’ll show you how to perform a channel scan, also known as channel programming. Note that your TV must be connected to a cable or antenna source through the coax port. If you use a cable box, you do not need to perform this procedure. In addition, your particular TV might have a different procedure. If these instructions don’t work for your TV, check your user’s guide. If your TV’s menu looks like this one, follow this procedure. Repeatedly press the INPUT button on your remote until ANT/CABLE is selected. Press the MENU button on the remote. Use the arrow buttons on the remote to select the icon associated with Setup. The icon looks like a gear. Select INSTALLATION and press the ENTER button. Select the icon in the top menu associated with TERRESTRIAL. This icon looks like an antenna. Select INPUT CONFIGURATION and press the ENTER button. Select either Antenna or Cable depending on your setup. Select DONE and press ENTER. Select CHANNEL PROGRAM and press ENTER. Select START SCAN and press ENTER. Progress will be displayed on your TV. Once the scan in complete, the TV will display the lowest scanned and identified channel. You should now know how to perform a channel scan on your Toshiba TV. For more information, visit support.toshiba.com.